There is simply more information here.Īt the beginning we have a comment in brackets. And as you can see at first glance, we have differences compared to what we analyzed. Then indicate the location where the file with the machining program will be saved and click OK.Ī window appeared, this time with the part program. Otherwise this button will be grayed out. Of course, the operation must first be selected. Therefore, let’s generate the program and to do this click button Post Process the selected Job.
But are you sure? Remember that what we are looking at is only g-code analysis, the program itself has not been generated yet.
Next we have milling in the XY axes and the feed value is F100.Īnd despite the fact that we set values in mm/s here, in the machining program we have generated what we wanted to achieve, i.e. in the XY axes to 100.Īnd here, in the first line with movement G1, we only have movement in the Z axis and the feed value is F10. in the Z axis to 10, and the horizontal feed, i.e. So everything agrees with what we defined when determining the parameters in this machining strategy.Īs you remember, for tool T11 we set the vertical feed, i.e. The next coordinate is Z-0.8 and the next, the last one is Z-0.999, which is practically Z-1. The G1 means moves with work feed rate, when the tool is working in the material and we see that the machining of the material begins in the Z0 coordinate. If you click on individual lines of the machining program, the specific part of the tool path will be highlighted.Īnd we will only analyze the values for the G1 move in the Z axis. Then fast move, only in the Z axis, move to the Z3 coordinate, i.e. Then there is a G0 rapid move to the XY coordinates of the beginning of machining. The machining program begins with the Z5 coordinate, i.e. Let’s check now whether the levels in the Z axis that we specified when defining the operation match to what we get in the machining program.Ī window has appeared in which we can analyze the g-code. Analysis and generation of the machining program
0 kommentar(er)
